Animal Removal Crown Point Indiana

Humane Crown Point Animal Removal Services

free animal removal services

  • How to get squirrels out of the attic
  • How to get raccoons out of the attic
  • How to get rid of armadillos
  • How to remove bats in the attic
  • Attic Restoration & Damage Repairs
  • Dead Animal Removal Services
  • Best Ways To Get Rid Of Rats

animal removal

Animal Removal in Crown Point Indiana – Michigan City Wildlife Control Services

We operate a full-service Crown Point wildlife control company, and with our full house/grounds inspection, we can offer solutions to prevent animal problems in the future.

When we do an inspection, we will be able to tell you what the problem is. With a complete understanding of the animals we work with, we can quickly and easily identify which pest animals are causing the problem and exactly where the animals are gaining entry. With our expertise and vast awareness of wildlife, we work efficiently, solving your Crown Point Indiana nuisance animal problem as quickly as possible.

Skunk Facts, Identification & Control


humane wildlife services

Wild raccoons are capable of causing an extensive amount of damage and mess to a home or property. They are known to take shelter in residential and commercial areas, commonly invading attics, crawl spaces, roofs, vents, ducts, garages, sheds, porches, and more. They use these areas to protect themselves and their young from harsh weather and cold temperatures; as well as, for breeding grounds and feeding.

Once raccoons are occupying a particular area of a residential or commercial property, they immediately begin their destructive tendencies. For instance, raccoons can chew through wood beams and electrical wiring, rip down attic insulation, and saturate dry wall, sheet rock, ceilings, and other areas of a home with urine and feces.

Many property owners are overwhelmed with the sight of their home or building after a raccoon infestation. Once they are professionally removed, what happens to the area that has been destroyed? Continue reading to learn about professional raccoon cleanup services and how they can help a property owner in distress following a raccoon infestation or disturbance.

When wild raccoons have nested, burrowed, and hibernated in a home or building for an extended amount of time, the chances of structural damage is high. Dry wall is ripped, torn, and saturated with animal urine and droppings; while attic insulation, ceilings, and more are also saturated with urine and ripped away for nesting and playtime. On top of these damages, extreme structural damage is likely too. Porches, decks, roofs, and more have to be gutted or replaced at times; depending on the degree of damages. In other cases, restorations can take weeks or months to complete because of the extensiveness of harm and destruction.

  • Skunk Poop - Scat

  • Why Do Skunks Dig?

  • Have a Bat in Your Home?

Homemade Raccoon Repellent to Get Rid of Raccoons


wildlife removal company

Would you like to know some more about the fundamentals of what this subject matter has to put forward to one person who wants to know more about Minnesota bat control and Minnesota bat removal? In Minnesota the little brown bat can be a real nuisance to home owners. There are many people out there who like to do things themselves and this is where this article may help you.

At the time of the inspection of the home requiring bat proofing we can ascertain the size of the bat colony and the best period to evict the bats. On certain times of the summer season bats create maternity colonies. Dependant on the geographical location, the bats should only be evicted when the adolescent bats are able to fly. The bat pest control professionals like to use a one-way door or related to as a valve. These one way doors let the bats egress not granting the bats back in. This form of bat removal is indorsed by the organization Bat Conservation International.

The most important thing in how to get rid of bats is paying attention to small details. You must fill all construction voids, anything greater than a 1/4 inch must be sealed otherwise a bat that is evicted through the one way door will find its way back into the structure. So in general the entire exterior of the structure must be sealed to avert re-entry of bats. We'll go to the extent of sealing any defect or construction hole if you are not sure seal if a bat can get past that point seal the hole. You'll also need to exclude gable vents to hold the bats out. I'll start by blocking off attic vents, louver vents, and ridge vents with 1/4 inch hardware cloth so the bats can't breach them for future use bay bats. They can be painted, but you'll find it blends in nicely left unfinished. Inspect loose flashing leaving openings, and chimneys seal this area's if necessary. Check for holes around where the chimney goes through the roof line, carefully seal cracks and if the bats are using the opening then install a unidirectional door.

You can put together your own one way doors for bats by using the spent sealant tube. Or you can purchase pre-made bat valve from a wildlife control supply company online. After you install the one way doors on the points of entry leave them on the opening for approximately two weeks. During the two weeks you should hear the noises from the bats decrease or not see them leaving the structure anymore. Then you can remove the one-way doorway and then seal the final voids.

At this point your Minnesota bat removal is complete. After the bats have went out through the one-way valves the bats will try for a few nights to get back in, by looking for another entrance this is why the exclusion of every possible entrance needs to be done.

  • Why Is There a Dead Raccoon in My Yard?

  • Baby Skunks

  • Squirrel in Chimney

Skunks Fell Down Window Well/basement


animal wildlife control

Want to know more about the ABC's of what this area under discussion has to propose to every human being who is willing to do things for themselves? During an inspection of the structure needing bat eviction I can determine the size of the colony and the best time of the year to remove the bats. During certain times of the year bats form nursery colonies. Depending on your geographical area the bats can only be removed when the young bats are able to fly. We like to use a one-way door or referred to as a valve.

These unidirectional escapes lets the bats escape not allowing the bats back in. This type of bat control eviction is approved by the organization Bat Conservation International. The utmost critical thing in bat removal from a residence is attention to all the little construction gaps. When closing all construction gaps, anything larger than an a quarter inch should be sealed. You have to seal the entire home to foil bats from getting back in. You will go as far as sealing any fault or construction crack. Ill need to exclude vents to keep bats out, let's start by closing off louver vents, attic vents, and ridge vents if bats can breach them using 1/4 inch screen. These can be painted to match, but I have found it blends in nicely left unpainted.

Inspect chimneys, bricks and mortar may be loose forming gaps. Look for gaps around where the chimney goes through soffit, carefully seal gaps and install a one-way door, if a bat way in is there. Ridge venting systems are feasible bat entrances. When looking at the ridge vent closely you'll usually find the plastic ridge vents deform leaving gaps, I've seen where varmints have chewed a gap in the vent. I will do away with the previous roof vent system and replace it. Primarily, you lay down 1/4 inch hardware cloth this keeps the bats, mice and squirrels from getting through. We will install a one-way bat door here also if the bats were using this area. Finally you'll finish the attic vent with a vent system referred to as Cobra vent, and then finish it with top cap shingles. We try to color match any calking, tin work and exclusion work to make it merge in as if we have not had to fix the construction defects. We use paintable caulking, the silicon based calks will tinge over time.

I build my own one-way doors. After ten years of bat control, I came up with an easy effective one-way valve for bat removal. You can purchase commercially produced bat cones but I personally think they are too short and have no airflow at the base where it is attached to the structure. These one-way doors are left on for about two weeks, to let bats leave. Then I can remove the one-way door and then block the entrance. After the bats have exited through the one-way doors the bats will try for several nights to get back in, by looking for another entrance, this is why sealing every possible entrance needs to be done. This is how to evict bats.Find out more by reading our other articles on this topic and other subjects we have written related to it.

  • Health Concerns Related to Bats

  • Bat Removal & Control, Bat in Attic

  • Dead Squirrel Removal


Indiana Wildlife Removal